Best Camera Lens Hood You Need to Buy in 2019

While you often see people using DSLRs or mirrorless cameras in the city or at sights, you almost never detect them using a sunshade. In this article, I will discuss the Best Camera Lens Hood You Need to Buy.

Check Details on Amazon

If you look at the lens of people using DSLR or mirrorless cameras around the city, you will find that most people tend to shoot with the lens alone, without attaching a lens hood.

There may well be some who do not even know that there is a lens hood, as it is not a standard problem in input and mirrorless DSLR camera kits. However, a lens cap is a very important item.

A lens cap is an accessory that you attach to a lens, which, if compared to a person, is like a hat or helmet that they would wear. Three reasons to wear it A hat or helmet are as follows:

To avoid strong sunlight
To protect the head
To look good

The same goes for a lens hood as there are good reasons to wear it too. Here I will present three reasons why it is best to use a sunshade and the effects of using one.

There is almost nothing to lose by attaching a lens cap, so it would be a good idea to attach one, especially if you are a beginner. We will briefly discuss the Lens Hood for Canon and other lenses.

Lens Hood for Canon 18-55mm Lenses

When it comes to photography, there are literally thousands of accessories to choose from. In most cases, many of these accessories add no value or functionality to photography.

However, when it comes to lens caps, they are an extremely affordable and highly valuable piece that can benefit your image quality in an instant. There are also some other benefits you may not even have thought of!

So how lens caps are such important items for any photographer level. I decided to round off the best lenses for Canon 18-55mm lenses and other 58mm screw lenses. Let’s get stuck!

How a lens hood can benefit your photography

Avoid lens flare: Have you ever taken an amazing photo just to realize that there is a large lens flare all over the image? Well, a lens hood is a great way to fix this as it blocks the rays from the corner of the lens.

Protect the lens: Another great advantage of using a lens cap is that it helps protect your lens when not using a lens cap. If you accidentally drop your lens, the lens cap helps protect the corners. This also prevents scratches on the front element.

Great for the landscape: When using a lens hood, it opens up many opportunities to capture different environments. In particular landscape photography. It allows you to navigate to your widest focal length with minimal brightness.

1. Canon EW-63C Lens Case for EF-S 18-55mm

Canon EW-63C Lens Case for EF-S 18-55mm reviewFirst on my list is an official Canon lens case that is made specifically for Canon kit lenses. It is equipped with a 58mm lead and is compatible with the Canon 18-55mm and Canon 75-300mm lenses.

Being a genuine Canon product, it fits perfectly into my Canon lens and can also be attached to a glass UV protection filter. In all, it took about 20 seconds to attach. Now I can go capture images without lens flare!

This particular hood is called a petal or tulip lens hood because of its blooming design. I also used cylindrical and retractable hoods, but I think the tulip design is the best.

When using the other designs, there is sometimes some vignetting effect at the corners when going the longest focal length of 18 mm. This can really ruin a photo because you can’t retrieve these pixels in post production. Overall, this is my top recommendation!

Check Price on Amazon

2. Goja 58MM Professional Lens Filter Accessory Kit

Goja 58MM Professional Lens Filter Review Accessory KitLast, but not least, in my gathering is GoPro 58mm lens accessory kit from GoPro. Seriously, this thing is full of items and I don’t even know how they are making money from it.

Needless to say, all of these items are extremely cheap, yet each one serves a purpose and is better than nothing. All in all, this kit has a lens cap, lens cap, 3 x filters, cap strap, microfiber cloth and a pouch.

So while not the best quality material available. It lays the groundwork for novice photographers who need these items while staying within budget.

As for the lens hood, it is made of cheap plastic, but is still easily attached to my Canon EF 18-55mm lens. I now keep this hood on my other kit lens permanently. That means I don’t always have to change. Overall a great kit on the cheap!

Check Price on Amazon

More Camera Lens Hood

Height Photo Collapsable Rubber Lens Hood For 58MM Filter Thread ReviewNext Only my list of best lens covers for 18-55mm lenses is the detachable rubber lens Height Hood that is great for a wide range of uses! Even better is that this lens cap is incredibly cheap.

While the above tulip hood is great for wide angle photography, this hood is great for telephoto images. This is mainly due to the large bowl-like design that will not prevent any vignetting but still blocks glare in telephoto mode.

However, when it comes to wide angle, I noticed that some vignettes fit together. But this is easily fixed, as this is a folding hood that has 3 separate levels of extension. Then I could easily adjust it to my desired focal length.

What I also liked about the detachable design and rubber construction was that I can squeeze it or compress it to fit easily into my camera bag. Just be aware that the sun can cause some long term damage to the rubber. A great choice!

Hoods provide extra protection against accidental shocks or scratches thanks to high quality materials.

Soft yet extremely durable, providing flexibility and protection.

Adding a lens hood can help prevent flames – those circles of light that can accompany images where a strong light source is outside the frame.

58mm Hood Set

3 in 1 Detachable Rubber Lens Cap:

Extend to full length for use with a telephoto lens
Collect midway for wide angle shots
Collapse completely for macro photography or easy, compact storage
Features a metal ring screw mount for easy attachment to your lens or filter. Specially designed for a tight and secure fit. No oscillation or cross-threading.
The double-screw thread mount also allows you to attach lens caps, filters, or other accessories to the hood itself without having to remove the hood first.

Professional Tulip Lens Hood:

Allows greater versatility. Perfect for standard or zoom lenses.
Easy to use lens mount screw bolt screws right into your lens or filter.
It has a rear locking ring to allow the user to rotate the hood in any direction and capture the exact amount of shading desired.
Lens hoods also have the added benefit of providing extra protection to your lens from accidental impact or scratching.
Hard rubber lens for an extremely solid and lightweight feel. Specifically designed for a secure and secure fit.
MagicFiber Premium Microfiber Cleaning Cloth
Ultra kind! Extremely thin microfiber leaves zero scratches, scratches or marks. Safe for all lenses.
6 x 7 inches (15cm x 18cm)

Compatibility

The Lens Hood is Compatible with the CANON Rebel (T6i T6 T5i T5 T4i T3i T3 T2i T1i XT XTi XSi SL1), CANON EOS (700D 650D 600D 550D 500D 450D 400D 350D 300D 1100D 1000D 100D 60D) with 58MM Lens wich include: EF-S 18-55mm f/3.5-5.6 IS II , EF-S 55-250mm f/4-5.6 IS II , EF 50mm f/1.4 USM , EF 75-300mm f/4-5.6 III USM.

Check Price on Amazon

JJC LH-J49 Professional Lens Hood

JJC LH-J49 LENSION WORKS PERFECTLY
It bayonet in my ZUIKO 60mm f2.8 macro and stays safe.
Glides smoothly from fully extended to fully retracted and recessed.
He “clicks” into place in the “extended” and “retracted” positions.
The semi-matte black plastic exactly matches the outer lens finish.
You can use the 46mm lens cap that operates with the lens, with the lens in place.
You can use 46mm filters with lenshood if you wish.
It’s a fantastic value compared to the “official” lenshood of $ 50.
Like the “official” lenshood, this is a great design – a lens that you can (and should) permanently leave on your
lens, extending it for use and retracting it for storage. I wish all of my lenses had similarly designed lenses.
About 2 1/4 “in diameter, it is only slightly larger than the lens diameter.
In the stowed storage position, it provides extra protection for your lens.

The lenshood was as hard as other critics complain when I received it.
So I spread a TINY amount of Permatex 22058 Dielectric Tune-Up Grease Silicone Grease, 3 oz. Tube inside the lenshood. Then I stretched and collapsed the lens several times to spread the fat around. Then I carefully wiped all traces of the fat off with a cotton cloth and cotton buds.
Presto !!! The lenshood works perfectly.

CAUTION

It is important to use only silicone grease. Oil or petroleum-based grease damage rubber and some plastic surfaces. Vegetable oil (such as cooking oil) can get sticky over time and make things worse. If you don’t already have a silicone grease tube, buy one – there are a multitude of uses, including the fact that most battery-operated electronic devices work better.

You only need a few molecules of silicone grease thickness to “fix” the lens. Slightly “dampen” a cotton cloth with a TINY amount of silicone grease, wipe the inside of the lens, spread it (opening and closing the hood) and wipe each trace of the grease with a clean cotton cloth. Use cotton swabs, if necessary, to enter any crevices.

Do not pick up anything on your lens. Since you will have to bayonet the hood on the lens to open / close it – make sure the lens is on the lens.

It is important to clean every trace of grease to avoid the possibility of transfer to a lens surface.
If you use silicone spray (oil) or any other spray or liquid, remove the lenshood from the lens to apply.

Check Price on Amazon

Fotasy Dedicated Flower Bayonet Lens Hood for Canon EF 50mm f/1.8 STM Lens

This Dedicated Lens Case fits Canon’s EF 50mm f / 1.8 STM Lens Replaces the Canon ES-68 lens cap. Tulip Shape. Prevent unwanted diffused light from entering the lens by extending and shading the lens tip.

It does not guarantee problems with vignetting or motor functions. Reversible for easy storage. Allows you to attach a filter and a lens cap.

Overall, this is a quality lens hood for the 50mm and 1.8m canon lens when fitted next to our original is almost identical and looks of the same quality.

Features

Adjusts the lens correctly
Easy to put on and remove
Fits well back on travel or times wins, not necessary, however, this makes it harder to focus manually
Great price (under $ 10)
Easy to read brand + model – we love the model number there as it is much easier to quickly get the correct one when you have multiple lens hoods for different lenses
Replacement for Canon Lens Hood ES-68 II / ES-68
Designed to prevent unwanted stray light from entering the lens.
Fits Canon EF 50mm f / 1.8 STM lens.
Please Note: This case does NOT fit Canon EF 50mm f / 1.8 II
Flower Type

Check Price on Amazon

Neewer Lens Hood for Canon EF 75-300mm

Neewer is a multinational company specializing in product development in the photography, film and music industry. Our focus is on research and development of new products covering all three sectors, from amateur equipment to full professional studio setups.

Since our inception in 2010, we’ve listened to the kinds of imaging products customers want. Based on our interactions with customers, we develop high quality and cost effective solutions.

Once we identify the types of items our customers want, we begin to research ways to meet this demand. Our ethos is to listen and talk to our consumers, develop the solution they want and then market a high quality product as the end result.

Product description & Features

Avoid glare and lens flare caused by unwanted light
Animate your photos with richer colors and deeper saturation
Flower-shaped design reduces vignetting effect
Protect your lens from minor impacts
Torsion fixing for added safety
Can be attached in opposite direction for storage
Material: hard plastic
Dimension: 8.5×8.5×5.5cm
Weight: 30g

Compatibility

Canon EF 55-250MM f / 4-5.6 USM

EF 75-300MM f / 4-5.6

EF 75-300MM f / 4-5.6 II USM

EF 75-300MM f / 4-5.6 II

EF 75-300MM f / 4-5.6 III USM

EF 75-300MM f / 4-5.6 III

EF 90-300MM f / 4-5.6 USM

EF 90-300MM f / 4-5.6

1 x Lens Hood

Note:

1. This lens hood CANNOT be used with filter together.

2. NOT compatible with Canon EF-S 55-250mm f / 4-5.6 IS STM lenses.

Check Price on Amazon

Veatree 58mm Lens Hood Set, Collapsible Rubber Lens Hood

Product description & Features

Size: 58mm Lens Hood Set
58mm Detachable Rubber Lens Cap
Rubber lens covers provide extra protection against accidental shocks or scratches thanks to the high quality shock absorbing rubber.
Adding a lens hood can help prevent flames – those circles of light that can accompany images where a strong light source is outside the frame.
3-in-1 Fold-out, zoom to full length for use with a telephoto lens, midway collapse for wide-angle shooting, full collapse for macro photography or easy, compact storage
Features a metal ring screw mount for easy attachment to your lens or filter. Specially designed for a tight and secure fit. No oscillation or cross-threading.
The double threaded screw holder also allows you to attach lens caps, filters or other accessories to the hood itself without having to remove the hood first.58mm Reversible Camera Lens Case
The professional design of the tulip shape (also known as flower or petal) allows for greater versatility. Perfect for standard or zoom lenses.
Unique design for quick disassembly and assembly. Normal mode and reverse mode to use.
Easy to use lens mount screw bolt screws right into your lens or filter.
Features a rear locking ring to allow the user to rotate the hood in any direction and capture the exact amount of shading desired.58mm Center Clamping Lens Cap
Center pinch design allows for easy attachment and removal even with a lens hood in place.
Microfiber Cleaning Cloth
Ultra kind! Extremely thin microfiber leaves zero scratches, scratches or marks. Safe for all lenses.

Compatiblilty:

CANON Rebel (T6i T6 T5i T5 T4i T3i T3 T2i T1i XT XTi XSi SL1)

CANON EOS (700D 650D 600D 550D 500D 450D 400D 350D 300D 1100D 1000D 100D 60D) with 58MM Lens wich include: EF-S 18-55mm f/3.5-5.6 IS II , EF-S 55-250mm f/4-5.6 IS II , EF 50mm f/1.4 USM , EF 75-300mm f/4-5.6 III USM

Nikon AF-P DX NIKKOR 70-300mm f/4.5-6.3G ED, AF-S DX 55-300mm f/4.5-5.6G ED and other 58MM lens

Check Price on Amazon

Professional 43mm Digital Video Hard Lens Hood

The lens tone of the camcorder is very useful to further protect the camcorder. It’s a basic hard plastic shade that has a cover available (which I don’t intend to use). A filter (Hoya slim uv) is mounted on the camera and the lens mask on the filter. I wear lens shades all the time to avoid any glare of light. Above all, it has a solid plastic quality feel. It is a cheap investment that will protect the front of the camera.

Professional 43mm Digital Video Hard Cover Lens With Cover For Panasonic TM300 H300 HV20 Canon HV20 H300 HV30 Canon HV10
43mm Digital Video Hard Lens Hood With Cap For Panasonic TM300 HS300 HS300 HS250 Canon HV10 HV20 HV30 Camcorders HV40
With lens cap
Professional Video Lens Case

Check Price on Amazon

Final Words

When it comes down to it, all of the above lens hoods would be great options for reducing lens flare and protecting your lens. Even better is that they are extremely cheap and really bring a new layer of professionalism to your photos. If you really want to make your game, you can also check out my guide on the 5 Best Vlogging Cameras For Beginners in 2019